No products in the cart.
If you are a visual learner, you can watch the related video by clicking the button below:
- Remove the BSS180 from its protective box and make sure all parts are complete and undamaged. If there are missing or damaged parts, do not start the installation and contact the manufacturer. Be sure to read the installation manual in the package and follow the instructions step by step.
- Park the motorcycle on a flat surface. It is very important that it stands upright and does not move.
- Clean the area where you will install the mirror thoroughly.
- Remove the protective tapes on the mirror and screws. Tighten the screws firmly and make sure that they are securely attached. Some mirrors may have slightly curved edges; after ensuring that they are firmly attached, tighten the screws gradually. The screws should be finally tightened with a fiber cloth to prevent them from slipping.
- When making adjustments, make sure the screws are not overtightened as this may prevent the mirror from functioning properly.
- If you are not satisfied with the adjustments you made, you can remove the screws and reattach the mirror by realigning it.
- When making adjustments, keep the screws loose so that you can make changes easily. After making the adjustments, tighten all the screws as needed.
- After making the adjustments, make sure the mirror is securely attached by ensuring that all screws are properly tightened.
- If you want to attach an additional support part, you can use the support part provided in the package and install it according to the instructions.
- Before removing the protective tapes, turn the screws to the desired position and tighten them. Ensure that they are in the correct position and securely attached.
- When making the adjustment, it is essential to ensure that the mirror is correctly aligned. If the mirror is too tight, loosen all screws a little. After making sure that they are aligned correctly, gradually tighten the screws.
- The mirror should be positioned properly to ensure it functions correctly.
- After making the adjustments, check that the mirror is securely attached by tightening all screws again if necessary.
We wish you a pleasant and safe ride.
— Mototekno Republic
